DanskDTU.dkIndexContact usPhonebookPortalenDTU Alumni
Title: X-ray facility for the ground calibration of the X-ray monitor JEM-X on board INTEGRAL
Type: Journal articleJournal article
Participant(s):
Forfatter:  Loffredo, G.
Technical University of Denmark

Forfatter:  Pelliciari, C.
Technical University of Denmark

Forfatter:  Frontera, F.
Technical University of Denmark

Forfatter:  Carassiti, V.
Technical University of Denmark

Forfatter:  Chiozzi, S.
Technical University of Denmark

Forfatter:  Evangelisti, F.
Technical University of Denmark

Forfatter:  Landi, L.
Technical University of Denmark

Forfatter:  Melchiorri, M.
Technical University of Denmark

Forfatter:  Squerzanti, S.
Technical University of Denmark

Author:  Brandt, Søren (Cwisno: 38321)
Technical University of Denmark
Email:

Author:  Budtz-Jørgensen, Carl (Cwisno: 38278)
Technical University of Denmark
Email:

Author:  Laursen, Steen (Cwisno: 38317)
Technical University of Denmark

Author:  Lund, Niels (Cwisno: 38305)
Technical University of Denmark
Email:

Author:  Polny, Josef (Cwisno: 38292)
Technical University of Denmark
Email:

Author:  Westergaard, Niels Jørgen Stenfeldt (Cwisno: 38304)
Technical University of Denmark
Email:

Abstract: We describe the X-ray facility developed for the calibration of the X-ray monitor JEM-X on board the INTEGRAL satellite. The apparatus allowed the scanning of the detector geometric area with a pencil beam of desired energy over the major part of the passband of the instrument. The monochromatic radiation is obtained with the use of a double crystal monochromator at fixed exit. We discuss the facility performance.
Published: in journal: Astronomy & Astrophysics (ISSN: 0004-6361), vol: 411, issue: 1, pages: L239-L242, 2003
See the publication in DTU Orbit See the publication in DTU Orbit

Top
DTU SpaceElektrovej, bygn. 327DK - 2800 Kgs. LyngbyTel (+45) 4525 9500VAT 30060946
Cookies